DIN-Schienen-Schaltnetzteil (DR-60-24)

Din Rail switching power supplyCompetitivedprice and high reliability 105oC Output capacitorAC input power suitable for the worldHigh efficiency and low operation temperature Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum waveModelDR-60-5DR-60-12DR-60-15DR-60-24DC output voltage5V12V15V24VOutput voltage range(Note:2)±2%±1%±1%±1%Rated output current6.5A4.5A 4A 2.5AOutput current range0-6.5A0-4.5A0-4A0-2.5AWave and noise(Note:3)100mVp-p200mVp-p240mVp-p480mVp-pInlet stability(Note:4)±1%±1%±1%±1%Load stability(Note:5)±1%±1%±1%±1%DC output power32.5W54W60W60WEfficiency72%77%77%80%Adjustable range for DC voltage4.75 5.5V10.8 13.2V13.5 16.5V21.6 26.4VAC input voltage range85 264VAC 47 63Hz;120 370VDCInput current1.5A/115V 0.75A/230VAC inrush currenCold-start current 30A/115V 60A/230VLeakage current<1mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: tuto recoveryTemperature coefficient±0.03%/°c(0 50°c)Setup, rise , hold up time800ms, 60ms, 50msVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: Input and encolsur: 1.5KvAC, Output and enclosure: 0.5KvACIsolation resistanceInput and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHOverall dimension78×93×56mmWeight0.3KgsSafety standardsMeet UL 1012 requiement (Not apply for the mark)EMC standardsMeet FCC PART 15 J Conduction class BNote: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer.2. Error: include the setting error, line stability and load stability.(Note:5).3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.4. Inler woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage.5. Load stability test: The load is from 0% to 100%.