CNC-602A Injektor cleaner & tester-Großhandel p

CNC-602A injector cleaner & tester CNC-602A is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle. Feature * Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely. * Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush. * Leakage test: To test the sealing and dribbling conditions of injectors under system pressure. * Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection. * Auto. test: To test injectors by simulating different working conditions. * On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle. Specification * Power supply: AC220V±10%, 50/60Hz;AC110V±10%, 50/60Hz. * Input power: 250W; * Ultrasonic cleaner power: 100W * Simulated RPM range: 10 9990rpm; step: 10rpm; * Time range: 1 9999s; * Pulse width: 0.5 25ms; step 0.1 ms; * Fuel tank capacity: 4700ml; * Dimensions: 695mm x 495mm x 600mm; * Weight: About 41kg Function ImprovementItemNotes on ImprovementUpdate DateThe Change about test liquid package on CNCWe divide the 4 liter test liquid into 4 bottles; the total amount is the same to the last one. We reduce the package of the test liquid to avoid the leak.2010-8-2Issued new edition user manual for CNC seriesConsolidate the user manual of CNC series(CNC602A/801A/601A) together2007-11-22Issued software AT89S52 for CNC-602A(with membrane key)Optimize software which required by upgrading CNC series2007-11-14Remove overflow valve and related structureMaximum pressure and release are controlled by adjusting the overflow valve.Now no need for adjusting the overflow valve and the operation is simplified.2007-9-24Separate the backlight cover and the cabinet by fixing the light to the holderFixed backlight is changed to the fixing of holder. Light cover and cabinet are separated and fastened with screws. This gives convenience to service.2007-9-24Touch keys on control panel turned to membrane keysThe membrane keys can be more reliable, easy to replace and not prone to get damaged.2007-9-24Fast resetting of oil pressure to default valueFast resetting can be done by pressing function key and run key..2007-9-24Integration of power socket and fuseEasy to install the integrated power socket and fuse.2007-9-24Replace two switches for power and backlight with one switchPower and backlight are controlled by two switches before,now controll by only one switch.2007-9-24Change separate cable connection to cluster cable connectionConnection with single cable makes the installation troublesome before,now easy to install after the change.2007-9-24Change the refilling mouth from square mouth to funnelFunnel for refilling can be opened for refilling so that overflow is impossible.2007-9-24Surface treatment for cross crew stainless screw is cancelled.Cross crew stainless screw,GB818-85,M4*12(with white zine)(code:103010124).Its ERP name is changed to cross crew stainless screw,GB818-85,M4*12 (code:103010124)2006-12-15Update for company address and telephone on the carton of CNC SeriesFor the company address and telephone are changed.2006-12-15The pressure display of CNC-602A is changed to the pressure gauge indicating.The pressure sensor and LED level display function are cancelled (oil floater is cancelled accordingly). The fuel level is controlled by level switch and the pressure is indicated by pressure gauge.2006-12-15Changing the length of installation screw for fuel pump included in CNC-602A cabinet assemby.The original screw was short,which makes the installation of fuel pump is difficult.Now the longer screw is used.2006-12-15Updating the process way for screw of CNC-602A.The inner screw used in the cabinet, fuel tank, left side panel and right side panel under the CNC-602A cabniet assemby is inner curling screw, now is changed to nut.2006-12-15Updating the hole position and size of the nameplate of CNC SeriesChange description: 1.Aluminium nameplate of CNC-602A (10320088): the size of original hole is 4-φ3,which is changed to 4-φ4. 2.the back panel of CNC-602A (X103200214): its installation size is changed to 112X57.2006-12-15