Chip-Aluminium-Elektrolyt-Kondensator

Chip Aluminum Electrolytic Capacitor: 1.Case diameter:4mm 10mm 2.Reflow soldering is avaiable 3.Avaiable for high desity surfance mounting Specifications: Temperature Range-40 +85Voltage Range4V 10VCapacitance Range0.1uF 1500uFCapacitance Tolerance±20%(120Hz,+20)Leakage Current1≤0.01CRVR or 3(uA),whichever is greater(After 2 minutes applications of rated voltage) CR :Nominal Capacitanec(uF) UR:Rated voltages(V) Disspation Factor(tgδ) (120Hz,+20)UR(V)46.3101625355063100tgδ0.350.280.240.200.160.140.120.120.1Load LifeAfter 1000 hours application of rated voltage at 85,the capacitor shall meet the following requirement: Capacitance ChangeWithin ±20% of the initial value(≤16V:Within ±25% of the initial value) Dissipation FactorNot more than 200% of the initial specified valueLeakage CurrentNot more than the initial specified value Shelf LifeAfter storage for 500 hours at 85,the capacitor shall meet the requirement of load life above. Low Temperature stability Impedance Ratio(120Hz)UR(V)46.3101625355063100Z(-25)/Z(+20)<Φ743222222≥Φ754322222Z(-40)/Z(+20)<Φ1588443333≥Φ15108643333Resistance To Soldering HearThe capacitors shall be kept on the hot plate miantained at 250 for 30 seconds.After removing from the hot plate and restored at room temperature, they meet the following requirement. Capacitance changeWithin ±10% of the initial valueDissipation FactorNot more than the initial specified value