60W Dual-Ausgang Schaltnetzteil (D-60B)

60W dual output switch power supplyCompetitivedprice and high reliability 105oC Output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum waveModelD-60AD-60BCH1CH2CH1CH2DC output voltage5V12V5V24VOutput voltage range(Note:2)±2%±6%±2%±5%Rated output current4A3A3A1.8AOutput current range0.3-6A0.2-4A0.3-6A0.2-2.2AWave and noise(Note:3)75mVp-p150mVp-p75mVp-p150mVp-pInlet stability(Note:4)±0.5%±1%±0.5%±1%Load stability(Note:5)±0.5%±4%±0.5%±4%DC output power56W58WEfficiency73%73%Adjustable range for DC voltageCH1; +10, -5%CH1; +10, -5%AC input voltage range85 264VAC ,47 63Hz;120 370VDCInput current2A/115V 1A/230VAC inrush currentCold-start current 30A//115V,60A/230VLeakage current<1mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: auto recoveryOver-voltage protectionCH1: 5.75 6.75VTemperature coefficient±0.03%/°c(0 50°c)ON+5VSetup, rise , hold up time200ms,50ms, 20msVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: Input and encolsur: 1.5KvAC, Output and enclosure: 0.5KvACIsolation resistanceInput and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHOverall dimension159×97×38mmWeight0.55KgsSafety standardsUL 1950 TUV EN60590EMC standardsCISPR22(EN55022)class B, IEC801-2,3,4 IEC555-2 VerificationNote: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25 °c70% RH. Tempetature. 2. Error. include the setting error, line stability and load stability. (Note:5). 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1 uf&47UF capacitor short-cicuit for interrupting. 4. Inler woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%. 6. Total output canba maxinum Current, total load can not exceed the maxium output power.