250W geschlossenen Schaltnetzteil (S-250series)

S-250 Series switching power supplyCompetitivedprice and high reliability105oC Output capacitorAC input power suitable for the worldHigh efficiency and low operation temperatureSoft-start current can reduce the AC input impact effecticlyWith short-circuit and overload protectionCompact size, light weight100% full-load burn-in testInstalled with EMI filter, minimum waveModelS-250-12S-250-13.5S-250-15S-250-24S-250-27S-250-48DC output voltage12V13.5V15V24V27V48VOutput voltage range(Note:2)±1%±1%±1%±1%±1%±1%Rated output current20A18A16.6A10.4A9.2A5.2AOutput current range0-20A0-18A0-16.6A0-10.4V0-9.2V0-5.2VWave and noise(Note:3)150mVp-p150mVp-p150mVp-p150mVp-p150mVp-p150mVp-pInlet stability(Note:4)±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%Load stability(Note:5)±0.5%±0.5%±0.5%±0.5%±0.5%±0.5%DC output power240W243W249W249.6W 248.4W249.6WEfficiency82%83%84%86%86%87%Adjustable range for DC voltage10 13.2V12 15V13.5 18V20 26.4V26 32V41 56VAC input voltage range88 132VAC/176 264VAC selected by switch 47 63Hz;Input current6A/115V 3.5A/230VAC inrush current20A/115V 40A/230VLeakage current<3.5mA/240VACOverload protection105% 150% Type: pulsing hiccup shutdown Reset: tuto recoveryTemperature coefficient±0.03%/°c(0 50°c)Setup, rise , hold up time2s, 20ms, 20msVibration10 500Hz, 2G 10min,/1cycle, Period for 60min, Each axesWithstand voltageInput and output internal: Input and encolsur: 1.5KvAC, Output and enclosure: 0.5KvACIsolation resistanceInput and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩWorking temperature and humidity-10°c +60°c(Refer to output derating curve), 20% 90%RHOverall dimension215×115×50mmWeight1.15KgsSafety standardsDesign refer to UL 1950Note: 1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer. 2. Error: include the setting error, line stability and load stability.(Note:5) 3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inler woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%