Znc Edm Control System

Znc Edm Control System

original price: 1,00 USD
Dongguan, China
Production capacity:
2000 Set / Month
Dongguan, China
Company
86-769-86766897
Wendy liang
Contact person

Basic Information

Znc Edm Control SystemFunction Characteristic Introduction 1.More than 20,000 units of document storage capacity are provided. Namely more than 20,000 different mold or customer numbering can be stored. 2.With mirror surface processing circuit, a true mirror effect can be achieved. Also, it is even better to use orbit processing and powder mixing processing. 3.10 segments auto editing function. (1) Manual edit: edit the machining condition by experience. (2)AUTOZ auto edit: max. Depths, initial current and finished procession, machining area selection are provided, and then machining condition edit can be finished automatically. (3) Intelligent condition edit: electrode shape, electrode and work piece material, work piece section area and finished precision selection, depth setting area are provided, and then machining condition edit can be finished automatically. With either the three edit methods above, machining can be complete at a time by the way rough→moderate→fine. 4.X.Y.Z axis coordinates are switch with metric and English system. 5.If unstable, discharging condition is auto adjusted by modifying discharging efficiency and working time. After that, the condition will restore automatically. And it is also adjustable at any time. 6.Auto arcing detecting function. If unsteady caused by arcing occurs, the computer will adjust machining parameters and rise jump up height, then normal condition would return. 7.It could set that after 2 10 times discharging (jumping up control), the electrode will be raised (safe height Z) to the set arbitrary position and the continue machining. This could achieve good slagging off performance for deep hole machining. 8.Function of avoiding second discharging and carbon desposition rapid rising or discharging boundary searching rapid rising. 9.Power control (equal energy) function for homogenizing the machining effect. And this function could be switched off to accelerating graphite electrode machining. 10. Generator new design conforms to power supply box and 15 CRT (display) criterion of European CE Safety Specifications, which it is dustproof, waterproof, electric noise-proof and the circuit board life could also be raised. 11. Industrial class PC-BASE controller is applied and the traditional hard disk is substituted by new DOM type memory, which enables faster and more steadily speed of file reading and it is more suitable for industry application. 12. Up discharging (reverse machining) function makes special machining easier. 13. Two independent machining coordinates. The male die and female die could be parted or machined in different coordinates. 14. After power off, the system restarts and auto reloads the machining condition and coordinate of last times, so discharging could be finished by pushing remote control box without panel operation. 15. Two jmpping up speed type, which the serve speed could be raised when no electrode deformation and the big area machining efficiency could also be raised. 16. Separately storage of coordinate and machining data, and same machining condition could be rapid added in different part machining. 17. Two high voltage circuits could be set in partial voltage or partial current according to customers need. 18. arcing detection setting function could start carbon desposition hardware detecting circuit, and every charging pulse could be detected and the current will be cut off when abnormal pulse occurs. So no short current is caused by short circuit. Discharging high voltage pulse control, which enables the settings of different high voltage pulse type and it could go with machining speed and electrode wear. CNC EDM Function Characteristic Introduction 1. Auto storage function enjoys a capacity of 100*40000 numbers. 2. 10 fine processing functions. Moulds can be finished completely from rough to semi-finished to finished products. 3. Five orbit processing patterns. One mould can be set by 5 different orbit processing patterns. 4. More than 1000 units of document storage capacity are provided. i.e. more than 1000 different moulds or custormers can be numbered. 5. Auto correction of electrode consumption. During multi-hole processing, electrode consumption shall be preset, and then the computer can automatically correct the depth of each hole to make sure each hole has the same depth. 6. Auto finding of moulds and central point, to enable a quicker compensation. 7. When the condition for discharging is unstable, the computer will correct the discharging efficiency and working period automatically. After stabling all conditions, the discharging will continue automatically. Processing condition can be adjusted at all time. 8. Auto return to zero for base point: should there be any blackout during auto-processing, the computer can find the base point automatically. 9. With mirror surface processing circuit, a true mirror effect can be achieved. Also, it is even better to use orbit processing and powder mixing processing. 10. 2 speedy deslagging. Speed up servicing to improve the processing efficiency without distorting electrode. 11. Orbit and side processing: / / / × / 12. English/Chinese Dialogue Operation, all processing data can be input easily via keyboard. 13. Operate DRY RUNNING before the actual processing to test the programming. 14. X. Y. Z axis apply ball bearing and non-back-lash bearing. With electromagnetic clutch, the machine can ensure the precision of processing. Also optic measurement can send feedback to the monitoring system. 15. Auto consumption to X. Y. Z axis. Precision can be assured while assembling machine tool. 16. Function of avoiding second discharging and carbon desposition rapid rising or discharging boundary searching rapid rising. 17. Power control (equal energy) function for homogenizing the machining effect. And this function could be switched off to accelerating graphite electrode machining. 18. It could set that after 2 10 times discharging (jumping up control), the electrode will be raised (safe height Z) to the set arbitrary position and the continue machining. This could achieve good slagging off performance for deep hole machining.

Delivery terms and packaging

Packaging Detail: standard export packaging Delivery Detail: 20 30 days after your confirmation
Port: DONGGUNG

Payment term

Letter of credit

Telegraphic transfer

Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1
    Рынок B2B
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product