Cutting Machinery

Cutting Machinery Our company can produce many kinds of aerated concrete euipments ,such as cutting machinery ,overturn hanger ,and so on . NumberNameUnitindexComments 1Production Capacity10,000m2/year 5-15Annual production2Size of blank (body )M4×1.2×0.6Net 3Moulds of cutting mm5/10Vertical cutting /cross cutting4Precision of cutting mm±3±1.5±1.5Lengthwidth, height5Production cyclemin/mould 5Vertical cutting/level cutting 6The weight of the main engine for the cutting machine t12Vertical cutting/level cutting 7Cutting mainframe capacitykw11.4Including hydraulic stationMain Features of the Machine1) The structure of the machine is Simple and practical and it is easy to be installed and maintenance 2) After overturning the blank stands vertically with the width of 60mm and the height of 1200mm,thus the cutting wire can be shorter and cutting precision can be more exactly due to that it is not easy to be broken and drifted;3) The vertical cutting is done by the vertical cutting device (the blank is fixed on the cutting table )while the horixontal cross cutting device is driven by the screw which can ensure even lifting of the cross ­cutting support and the cutting precision;4) As the blank stands vertically ,the grooves on both sides of the blank (with width of 600mm )can be milled at the same time when the blank is cut vertically ,no groove processing device is needed;5) The machine can produce both building blocks and slabs and the blank can be cut into six sides therefore the quality of product can not be affacted by affection of mould oil and the deformation of the mould;6) The machine is easy to control and all the cutting processes of the machine (overturning ,vertical cutting and level cutting )can be finished in different positions,otherwise the cutting and running are controlled in the same device therefore operation is simplified and maintenanc